Exam

Senior Operator

Grade: Non-Gazetted First
Service: Nepal Engineering Service

The Public Service Commission (Lok Sewa Aayog) conducts open and competitive exams to recruit qualified candidates for the Senior Operator position.

Full Marks: 200
Pass Marks: 80
Exam Type: Paper-based
Question Type: Both
Number of Questions: N/A
Negative Marking: N/A

The examination for Senior Operator is conducted in two phases:

  1. Phase - 1
    1. Written Examination
  2. Phase - 2
    1. Practical Examination
    2. Interview

Written Examination

The written examination consists of two papers, each worth 100 marks, for a total of 200 marks. The papers are conducted separately on the same day. The language of the written examination paper will be either Nepali or English, depending on the language in which the course content is provided. However, both languages can be used for clarification when needed.

The first paper comprises of objective multiple-choice questions from two subjects:

  1. General Awareness and Public Management
  2. Job Based Knowledge

The subject General Awareness and Public Management includes 20 questions worth two marks each, for a total of 40 marks. The subject Job-Based Knowledge includes 30 questions, worth two marks each, for a total of 60 marks.

Both subjects combined have 50 questions, totaling 100 marks. To pass this 45-minute exam, an examinee must score at least 40 marks.

In the objective multiple-choice exam, the examinee should write the answer in English capital letters: A, B, C, D. If small letters are written: a, b, c, d, or any other indication, all the answer sheets will be canceled.

In the multiple-choice objective question examination, incorrect answers result in a 20% deduction, and no points are given or deducted for unanswered questions. Using a calculator is not allowed during the examination.

The second written examination paper will include subjective questions about Job-Based Knowledge. It will consist of 12 short answer questions (60 Marks) and four long answer questions (40 Marks), totaling 16 questions worth 100 Marks.

For subjective questions, a single long question or a long question with two or more parts or short notes under a single question may be asked.

Each section of the subjective papers will have separate answer sheets, and the examinee must write the answers in the answer book of the same section.

Practical Examination (50 Marks)

The practical examination for Senior Operator is worth 50 full marks. The examinee must achieve at least 25 marks to pass this two-hour exam.

Interview (30 Marks)

Candidates who pass the written examination will advance to the second phase, which includes a 30-mark interview.

Eligibility

Minimum Required Qualifications

Engineer, Mechanical, Construction Equipment Maintenance, Senior Operator Position: Certificate level or equivalent in Engineering from a recognized institution and obtained a license to operate one of the construction equipment such as loader, grader, dozer, excavator.

Or

Passed TSLC or equivalent from a recognized institution and obtained a license to operate two of the construction equipment such as loader, grader, dozer, excavator.

Age Limit

Candidates must be at least 18 and not over 35 years old. The maximum age limit for women and people with disability is 40 years. 

There is no age limit for permanent staff of the Government of Nepal currently in service. 

Syllabus

Notwithstanding anything written in this syllabus, any amendments made to the laws, acts, rules, regulations, and policies included in the syllabus three months before the exam date will be considered part of this syllabus.

The courses implemented before the course effective date do not apply to the examination.

Course Effective Date 2080/10/22

First Paper: Objective Multiple Choice Question

The first paper is divided into two parts:

  1. General Awareness and Public Management
  2. Job Based Knowledge

Part

Section

Subject

Examination Type

Marks

Number of Questions * Marks per Question

I

A

General Awareness

 

 


Objective Multiple-Choice Questions

20

10 Questions * 2 Marks = 20 Marks

B

Public Management

20

10 Questions * 2 Marks = 20 Marks

II

-

Job Based Knowledge

60

30 Questions * 2 Marks = 60 Marks

Second Paper: Subjective Questions

The second paper consists of questions related to Job Knowledge. The course content for job-based knowledge is the same in the first and second papers.

Subject

Section

Marks

Short Answer Questions

Long Answer Questions

Job Based Knowledge

A

50

6 Questions * 5 Marks = 30

2 Questions * 10 Marks = 20

B

50

6 Questions * 5 Marks = 30

2 Questions * 10 Marks = 20

Syllabus for Practical Examination

A - General

  1. Walk-around inspection (Identifying the Components and Parts)
  2. Mounting and Dismounting Procedure
  3. General Maintenance Daily Maintenance Check
  4. Start Inspection (Before and After Start)
  5. Test Function as per the License
  6. Parking Procedure
  7. Equipment Loading and Unloading.
  8. Safety Measurements of Personal and Machine
  9. Machine Traveling Methods
  10. Grease Gun Handling

B - Job/Operation

Dozer

  1. Dozing: Slot, Side by Side, Angle and Down Hill
  2. Ripping
  3. Drain/Batter Construction
  4. Land Clearing
  5. Stock Piling

Loader

  1. Load/Unload (From Stock Pile & Truck Loading)
  2. Leveling
  3. Backfilling
  4. Lifting

Excavator

  1. Trench /Square Pit / Ditch Drain Excavation
  2. Truck Loading from Trench, Bank or Stock Pile
  3. Lifting

Grader

  1. Leveling
  2. Scarifying
  3. Drain Construction
  4. Cambering

Roller

  1. Rolling
  2. Compaction
  3. Ballasting

Crane

  1. Set-Up Procedure
  2. Familiarization with Hand/Whistle Signal
  3. Lifting Loads

Marks Distribution (For all Machines)

SN Task Marks
1 Walk around Inspection/Mounting and Dismounting 5
2 Maintenance Knowledge & Practical 5
3 Before & After Start Inspection/Test Function 5
4 One specific Job as per the machine/license 20
Loading/unloading equipment on the Machine/Parking the Machine 10
5 Safety Measurements 5
  Total 50

Sample Questions of Practical Test

  1. Identify the machine's hydraulic pump and fuel injection pump provided.
  2. Show the procedure to be followed before starting the machine.
  3. Travel on the provided machine.
  4. Park the provided machine.
  5. Using the machine provided, complete one of the tasks as per instruction.

Downloads

Curriculum for Senior Operator.pdf